HOMELAB / DOCUMENTATION

Home Network Overview

How I organized my home network around OPNsense, managed switching, and wireless access.

Overview

My home network started out as your typical consumer setup with a Modem/Router gateway supplied by our ISP (Xfinity) directly providing internet to all of our devices, with all network configuration being done through the Xfinity hardware. Eventually I wanted more control over routing, firewall rules, and which devices could talk to each other, so I moved those jobs to OPNsense.

This is an overview of what I use and why.

Hardware and layout

My Xfinity gateway connects to an OPNsense firewall appliance, which connects to a NETGEAR JGS524Ev2 managed switch. OPNsense is responsible for routing, DHCP, and firewall policy. The switch distributes wired connectivity and supports the VLAN configuration.

Some time before homelabbing, I had an ASUS “gaming” router attached to the Xfinity gateway to give me a little more control. Now, it’s still there but runs in a built-in Access-Point mode to provide better Wi-Fi coverage instead of acting as a second router.

At a high level, the flow is:

internet / Xfinity gateway
          |
      OPNsense
          |
    managed switch
       /      \
 wired devices  wireless access point

How I organize devices

Instead of putting everything on one network, I separate devices by purpose: trusted computers, servers, IoT equipment, cameras, and guests. OPNsense controls traffic between those groups.

I don’t assume that every device needs access to every other device. For example, guest devices only need internet access, and IoT equipment generally only needs specific services.

Things I learned

The network is still something I actively change as I learn, this page only describes the broad design.